Johnson EP-8000-4 Pneumatic Transducer, 0-10Vdc

EP-8000 Series Electro-Pneumatic Transducers convert a voltage or current signal from an electronic controller into a pneumatic output pressure signal. An increase or decrease in the input signal proportionally increases or decreases (respectively) the output pressure signal from the EP-8000. Four models are available, which are grouped into two basic versions: low-volume output units (non-relay) and high-volume output units (relay).

Johnson EP-8000-4 Features:

• High Volume
• Direct Acting
• 0.5 to 19 psi
• 122 degrees F Maximum Ambient Temperature
• 5/32" or 1/4" Barb
• 0 to 10 Vdc

Technical Information:

http://cgproducts.johnsoncontrols.com/MET_PDF%5C21...