Maxitrol 325-3L47-33 3/8" with 1, 12A09 Leak Limiter R325C10-711 5# Regulator +OPD47

The 325 Series is a pounds to inches regulator, meeting utility specifications. The 325 Series regulator is for use on residential, commercial, and industrial applications where adequate inlet pressures are available. They are a high performance type regulator and can be used as a single stage regulator - reducing pounds pressure to normal burner pressure. They can also be used as a line regulator on equipment already fitted with an appliance regulator.

Maxitrol 325-3L47-33 Features:

• 7-10" W.C. Outlet Pressure Set Point
• CSA certified for up to 5-psi inlet pressure
• Over-pressure protection device (OPD) to limit downstream pressure in case of regulator failure
• Maxitrol OPD approved and tested with the regulator
• Self-aligning valve with lever action for dead end regulator lockup
• Optional vent limiter eliminates the need to run vent piping to an outside area

Maxitrol 325-3L47-33 Benefits

• Meets ANSI standard Z21.80 for line pressure regulators — for use on piping systems such as CSST or semi-rigid copper tubing up to 5-psi
• OPD provides required downstream over-pressure protection for supply pressures in excess of 2-psi
• Pounds to inches regulator provides precise control from pilot flows to full regulator capacity
• Meets many utility specifications

Technical Information:

https://www.maxitrol.com/wp-admin/admin-ajax.php?juwpfisadmin=false&action=wpfd&task=file.download&wpfd_category_id=149&wpfd_file_id=4176&token=21336767812222733a45579c0546a491&preview=1