Antunes 803112603 HGP-A Gas Pressure Switch, 10-50" W.C.

The Antunes HGP-A Gas Pressure Switch, is a high gas pressure switch used commonly on industrial oven gas trains. The Antunes 803112603, HGP-A gas pressure switch, is rated at 10-50" (250-1250mm), and equipped with manual reset to assure proper interlocking.

Antunes Controls High-Low and single gas pressure switches monitor gas pressure and cuts off the electrical control circuit when pressure drops below or rises above the desired set point. The high and low gas pressure settings are adjustable and all models are available in reset or recycle type.

Antunes 803112603 Specifications:

Antunes Controls Gas Pressure switches monitor gas pressure. The models are available in high pressure and low pressure single gas switches and also in a double Hi-Lo combination switches. Pressure range varies from a 1 water column to 50 water column.

Each switch is adjustable within its range as shown on the range scale located on the front of the unit. The latch position in the reset models, and the lever indicator position in the recycle models, show whether the switch is on or off.

Antunes 803112603 Features:

Mount Horizontally - Does Not Require Accurate Leveling
Double Switch May be Ordered with any Combination of High or Low Pressure Ranges
Select Range to Meet Your Requirements
Setpoint Indication
Rugged Die Cast Aluminum Housing
Max. surge pressure 10 P.S.I.
Max.ambient temperature 140ºF, 60ºC.
Min. Ambient Temperature -40ºF, -40ºC.

See technical and extended tab for more information

Electrical Ratings:

10A, 1/8 HP, 125 VAC
5A, 1/4 HP,250 VAC
Pilot Duty - 125 VA, 125/250 VAC

Approvals:

UL File #: MH8009
CSA File #: LR25144
FM Serial #: 19797

Technical Information:

https://www.crossroadsindustrialservices.com/wp-content/uploads/2019/06/Model-A-OM-1011087-rev-CC.pdf
https://www.crossroadsindustrialservices.com/wp-content/uploads/2019/06/Model-A-OM-1011087-rev-CC.pdf