Brixon 91PSS-EP #91 Latch Body and Strike, Electropolished

The Brixon 91PSS #91 Latch Body and Strike is available with high quality, handsomely restyled, stainless steel housings and handles. Stainless steel internal parts are standard. The Model 91 provides the same pressure release range as the original and zinc Model 1 latches, which it replaces.

This industrial oven door latch is often used as a explosion relief latch or as a spring relief latch on industrial oven doors. Brixon is a great choice for door latches because they offer the widest pressure release range of any Factory Mutual (FM) approved explosion venting latch manufacturer, from as low as .01 PSI to pressure in excess of 3,000 pounds per door (using multiple latches). In addition to reliability and convenience, Brixon latches are designed to allow for installation from flush to well over 1 " offsets.

Casting Finish Options: Standard Investment Cast Finish, Electropolished, Polished/Buffed/Passivated

Release Force: Adjustable 3.9 lbs.-17 lbs. (1.8kg.-7.7kg.)

Handle Options: Available with integral handle (#91H) or without handle (#91P)

Weight:

• #91P Body and Strike only .56 lb. (255 kg.)
• #91P Body only .43 lb. (.195 kg.)
• #91H Body and Strike only .68 lb. (.310 kg.)
• #91 H Body only .55lb. (.250 kg.)
• #91 Strike only .13 lb. (.060 kg.)

Dimensions

• Length: 3-3/16" (8.09 cm).
• Latch only: 2-3/8" (6.03 cm). Strike only 13/16" (2.06 cm).
• Use 1/4" (6 mm) bolts for mounting.

Housing Materials: #91P Body, #91H Body, Strike & Cam are CF-BM Stainless Steel

Internal Parts: Ball Pin, Roller, Strike Pin, Screw & Cross Pin are 303 Stainless Steel. Spring is 17-7 Stainless Steel. E-Clips are 15-7 Mo Stainless Steel.

Offset Mounting: 3/16". No shim required.