Brixon 93LHSS #93 Latch Body, Handle and Strike, Stainless Steel

The Brixon 93LHSS #93 Latch Body, Handle and Strike is available with high quality, restyled, stainless steel housings and handles. Stainless steel internal parts are standard. 

This industrial oven door latch is often used as a explosion relief latch or as a spring relief latch on industrial oven doors. Brixon is a great choice for door latches because they offer the widest pressure release range of any Factory Mutual (FM) approved explosion venting latch manufacturer, from as low as .01 PSI to pressure in excess of 3,000 pounds per door (using multiple latches). In addition to reliability and convenience, Brixon latches are designed to allow for installation from flush to well over 1 " offsets.

Housing Materials: CF 8M (316) Stainless Steel

Internal Parts: Coil Spring: PH 17-7 Chromium-Nickel Stainless Steel. Ball Pin: 416 Stainless Steel (Hardened and Passivated). Cam, Nut, Rivets & Washers: 304 Stainless Steel. Roller, Strike Pin, Set Screw, Cross-Pin & Body Pin: 303 Stainless Steel. E-Clips: PH 15-7 SS.

Handle Type: Left-Handed

Finish: Standard Stainless

Release Force Range: 43 - 180 lbs

Mounting: Use 3/8" (Grade 8) or 10mm (Grade 10.9) bolts for mounting. 2 bolts required for strikes & shims. 4 bolts for latch body. Flat washers & lock washers are recommended.