Honeywell M9164A1054 Modutrol Motor

Honeywell M9164A1054 modutrol motor, 120V Non-Spring Return Foot Mounted Actuator with 35 lb-in. torque. Mod motors often control burner valves to modulate the amount of heat being produced by the equipment burner or to control dampers on exhausts, coolers, etc.

The Series 90 Modutrol IV ^TM Motors are spring return and non-spring return modulating proportional control motors. Use these motors with controllers that provide a Series 90 output to operate dampers or valves.

Note: This Motor Replaces M934A,D, M941, M944A,C,D, M945A,D,F, M954, M965, and M975 motors.

• Integral junction box provides NEMA 3 weather protection.
• Integral spring return returns motor to normal position when power is interrupted.
• Motor and circuitry operate from 24 Vac. Models available with factory installed transformer, or a field added internal transformer.
• Quick-connect terminals are standard—screw terminal adapter is available.
• Adapter bracket for matching shaft height of older motors is available.
• Motors have field adjustable stroke (90° to 160°).
• Die-cast aluminum housing.
• Integral auxiliary switches are available factory mounted, or can be field added.
• Nominal timing standard of 30 seconds (90° stroke), and 60 seconds (160° stroke). Other timings available.
• Spring return motors can operate valve linkages form power end or auxiliary end shafts for normally closed or normally open valve applications.
• All models have dual shafts (slotted and tapped on both ends).

This part is no longer available. There is no replacement

• Description Modutrol IV^TM Motor
• Application Type Electric
• Internal Auxiliary Switch 0
• Fail Safe Mode Non-Spring Return
• Control Signal Proportional, 135 ohm
• Feedback No
• Motor shaft Dual-ended shaft
• Stroke Adjustable; 90 to 160 degrees, Asymmetrical
• Torque Rating (lb-in.) 60 lb-in.
• Torque Rating (Nm) 4 Nm
• External Auxiliary Switches Available Yes
• Voltage 120V
• Frequency 60 Hz
• Frequency 50 Hz
• Power Consumption Driving (VA) 10 VA
• Electrical Connections Quick-connect terminals
• Shaft Dimensions (in.) 0.375 in.
• Shaft Dimensions (mm) 10 mm
• Shaft Shape square
• Mounting Foot-mounted
• Weight (lb) 7.5 lb
• Dimensions (in.) 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in. deep
• Dimensions (mm) 164 mm high x 140 mm wide x 185 mm deep
• Temperature Range, Ambient (F) -40 F to +150 F
• Temperature Range, Ambient (C) -40 C to +60 C
• Deadweight Load on Shaft (Either End) (lb) 200 lbs.
• Deadweight Load (Combined on both Shafts) 300 lbs.
• Nominal Timing (sec) 30-60 sec
• Shaft Rotation (upon control signal increase) Clockwise (as viewed from power end) (normally closed)
• Auxiliary Switch Ratings AFL - 120 Vac 7.2A
• Auxiliary Switch Ratings AFL - 240 Vac 3.6A
• Auxiliary Switch Ratings ALR- 120 Vac 43.2A
• Auxiliary Switch Ratings ALR- 240 Vac 21.6A
• Approvals, Underwriters Laboratories Inc Listed File: E4436, Guide: XAPX
• Approvals, Canadian Standards Association Certified: File No. LR1620, Guide No. 400-E
• Approvals, CE EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
• Includes Transformer