Honeywell M9484F1031 FSG Mod IV Motor Low/High Fire 2-Tapped Shafts

Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment.

Honeywell M9484F1031 Features:

• Vibration resistant electronic drive circuit
• Regulated by three-wire proportional controller
• 135 ohm input signal
• 2 Internal Auxiliary Switch
• Double-ended, 3/8" square shaft dimensions
• 90 Degree factory stroke setting
• 150 lb-in torque rating
• Adjustable; 90 to 160 degree, Symmetrical stroke
• 90 degree stroke - 30 sec, 160 deg stroke - 60 sec timing
• 24Vac // 50;60 Hz
• Power consumption: 15 W
• 6.45" high x 5.5" wide x 7.3" deep