Honeywell W7100A1053 Discharge Air Temperature Controller

Maintain an average discharge air temperature in variable air volume systems. Reduce kilowatt demand & consumption by maintaining the minimum amount of heating or cooling capacity required to hold the discharge air set point.

Honeywell W7100A1053 Features:

• 6-Stage Cooling Application Size
• When power is interrupted, the system cycles to all stages off.
• When power is restored, the economizer will first be modulated open (if enthalpy is suitable), then stages of mechanical cooling will be sequenced on.
• If enthalpy is not suitable for economizer operation, the first stage of cooling or heating is energized within five minutes.
• Reset signal from either space sensor or outdoor air sensor.
• 20 to 30 Vac
• 40 F to 90 F setpoint and operating temperature range
• 12 VA at 24 Vac, 50/60 Hz
• Staged On/Off Output type
• 1/4" Quick-connect male terminal electrical connection
• Application Size: 0 Heat / 6 Cool

Obsolete - Suggested Replacements require (2) component purchases.

1. PN#T775S2008
2. PN#T775L2007