Honeywell W7100A1053 6-Stage Cooling Discharge Air Control

Maintain an average discharge air temperature in variable air volume systems. Reduce kilowatt demand & consumption by maintaining the minimum amount of heating or cooling capacity required to hold the discharge air set point.

Features

• Staging capacity of the W7100A,C can be extended six stages using a W7101A Satellite Sequencer.
• When power is interrupted, the system cycles to all stages off.
• When power is restored, the economizer will first be modulated open (if enthalpy is suitable), then stages of mechanical cooling will be sequenced on.
• If enthalpy is not suitable for economizer operation, the first stage of cooling or heating is energized within five minutes.
• Reset signal from either space sensor or outdoor air sensor.
• 20 to 30 Vac
• 40 F to 90 F setpoint and operating temperature range
• 12 VA at 24 Vac, 50/60 Hz
• Staged On/Off Output type
• 1/4" Quick-connect male terminal electrical connection
• Application Size: 0 Heat / 6 Cool
• 8-5/8" high x 6-1/2" wide x 3" deep

Technical Literature: