SealMaster MPD-36 CXU Medium Duty Pillow Block Bearing, 2-1/4" Shaft, Air Handling, Set Screw Ball Bearing

The SealMaster MPD-36 CXU Medium Duty Pillow Block Bearing is a medium duty set screw ball bearing.

SealMaster MPD-36 CXU Benefits:

• Sealmaster mounted ball bearings with double set screw locking are available in a wide variety of features: 7/8" - 4 15/16", Standard and medium duty series
• Double set screw locking incorporates extended inner races on both sides of the ball path resulting in a total of 4 set screws (2 on each side) for better load distribution, resulting in greater holding power when operating at high speeds and when vibration may be present.
• Wide outer ring design provides increased grease capacity to lubricate the bearings.
• Anti-rotation - pin & dimple system prevents the bearing OD from creep/rotation due to vibration over time while providing a full ± 2° of static misalignment.
• Direct lube - pin & dimple system provides a direct lubrication path into the bearing, eliminating the need to channel grease around a lubrication groove common on standard mounted ball bearing units.
• Felt labyrinth seal with rotating flinger directs contamination away from the sealing surfaces. Alternate seal options available upon request, see Sealmaster Custom Select for more information.
• Black oxide standard on inner/outer rings and seal components inhibits corrosion.
• Zone hardened inner race provides a fully hardened ball path while leaving the race extensions unhardened, allowing better set screw holding power.
• Length through bore is longer than most competitors for greater shaft stability.
• Land-riding brass retainer has high strength, minimizes friction and provides maximum grease circulation.
• 120° balanced set screw position provides three-point balanced contact that minimizes vibration, reduces noise and improves reliability of the shaft assembly.
• Precision manufactured, diamond faceted set screws improve clamping and resist backing out.
• Solid base, pillow block, cast iron housing provides improved stability and resistance to shock and vibration.
• Permanent metal nameplate allows for easy identification after years of operation.
• Factory-filled with Sealmaster GOLDPLEX HP lithium complex NLGI 2 grease.

SealMaster MPD-36 CXU Features:

• 2-1/4" Shaft
• Ball Rolling Element
• Standard Felt Seal
• Solid Housing Base
• Metal Land Riding Retainer
• 200° Max Operating Temperature
• Cast Iron, two-bolt block
• Custom select suffix

Industries

• Aggregate
• Grain
• Foundries
• Baggage
• Wastewater treatment

Applications

• Conveyors
• Bucket elevators
• Mining machinery

• A=2-3/4
• B=10-1/4
• C Min.=6-9/16
• C Max.=7-15/16
• D=3-1/8
• E=1-7/16
• F=13/16
• H=5-5/8