Midco 641297 Ignitor Control Piping Natural Drill #58 Assembly Includes: Orifice Tee 1/8" Pilot Regulator 1/8"M x 1/4"T COMP Elbow 1/8" NPT x 1-1/2" Long Nipple 1/8" Pipe Plug For use on the following burners: J81A-3 J121A-3 J83-DS J40-DS J80-DS J80-3...

Midco 640790 Mounting Flange Replacement Kit For use on the following burners: J121-DS J81A-3 J121A-3 J83-DS J40-DS J80-DS J80-3

Midco 640500 J80 Series Ignitor Gas Inlet Block, Tube and Ignitor Tip Assembly For use on the following burners: J83-DS J40-DS J80-DS J80-3 J120-3 J81A-3 J121A-3 Technical Literature: Midco Incinomite Burner Series

Midco 626650 High Voltage Cable

Midco 572610 Orifice Block & Tube Assembly

Midco 571310 Flange Gasket For use on the following burner: RE32  

Midco 525301 Pilot Assembly with Insulators, Rods, Temflex, and Baffle For use on the following burners: 400-33 F400-13 F400-23 F400-33 Technical Literature: Midco Economite Legacy Series

Midco 523613 Blast Tube Assembly EC200 This is not a full burner unit. Please Note: Blast Tube Assembly Only.   Replacement for the following burner: EC200  

Midco 521120 Motor Wheel Assembly Replacement for the following burners: 400B-02 400B-02P DS45 DS45B

Midco 491900 400 Blower Wheel with Centrifugal Actuator Replacement for the following burners: 400B-02 400B02P 400-33 DS45 DS45B  

Midco 362750 7" x 3-1/2" Wheel MPG 1.5 Replacement for the following burners: A5 Gas A5 Oil A5 Gas/Oil Unipower G Unipower GB

Honeywell 32002515-001 Control Links 3-pin Electrical Connector 3 pin electrical connector, for R7999

Midco 2030801 J120 Series Natural to Lp KitFor use on the following burners:J121-DSJ81A-3J121A-3NOTE: Minimum billing of 75$ on Midco parts. If you would like to order this product in a quantity of one (1) and other Midco products, give us a call at...

Midco 2020400 Blast Tube Extension, 4" Long 4" Long x 4-1/8" O.D. For use on the following burners: DS24 DS24A 400B-02 400B-02P 400-33 DS45 DS45B E20B E20BP F400-13 F400-23 F400-33 F400B-33 RE32

Midco 2020300 Mounting Flange Kit, 5" For use on the following burners: F400-13 F400-23 F400-33 Unipower-G Unipower-GB

Eclipse 109344 Feedthrough Insulator The Eclipse 109344 Feedthrough Insulator is for 3" to 5" thick insulation and use with Eclipse burners. Eclipse 109344 Features: Length 7.76" 3/4" NPT Ignition Studs Both Ends Length: 7-3/4"

Honeywell Q314A6102 Target Pilot Burner B Bracket Non primary-aerated, insert orifice type pilot burner for main burner ignition. Honeywell Q314A6102 Features: Variety of mounting brackets available Variety of tip styles to provide desired flame...

Midco 844727 75VA Transformer 120V Prim/24V SecFor use on the following burners:Unipower-GB

Midco 842951 Fenwal 3561DSI Controller For use on the following burner: EC200 EC300 Technical Literature: Midco Installation Manual and Parts List

Midco 676600 G56 Natural Pilot Orifice Kit-Tee Fitting Gas #60 Dr. (.040) -- Air #26 Dr. (.147) Used on the following burners: Unipower G Technical Literature: Midco Unipower G Series Parts List