Burner Components

Midco 362750 7" x 3-1/2" Wheel MPG 1.5 Replacement for the following burners: A5 Gas A5 Oil A5 Gas/Oil Unipower G Unipower GB

Honeywell 32002515-001 Control Links 3-pin Electrical Connector 3 pin electrical connector, for R7999

Midco 2030801 J120 Series Natural to Lp KitFor use on the following burners:J121-DSJ81A-3J121A-3NOTE: Minimum billing of 75$ on Midco parts. If you would like to order this product in a quantity of one (1) and other Midco products, give us a call at...

Midco 2020400 4" Long Accessory Blast Tube ExtensionFor use on the following burners:DS24DS24A400B-02400B-02P400-33DS45DS45BE20BE20BPF400-13F400-23F400-33F400B-33RE32NOTE: Minimum billing of 75$ on Midco parts. If you would like to order this product in...

Midco 2020300 5" Mounting Flange KitFor use on the following burners:F400-13F400-23F400-33Unipower-GUnipower-GBNOTE: Minimum billing of 75$ on Midco parts. If you would like to order this product in a quantity of one (1) and other Midco products, give us...

Honeywell Q314A6102 Target Pilot Burner B Bracket Non primary-aerated, insert orifice type pilot burner for main burner ignition. Honeywell Q314A6102 Features: Variety of mounting brackets available Variety of tip styles to provide desired flame...

Midco 844727 75VA Transformer 120V Prim/24V SecFor use on the following burners:Unipower-GB

Midco 842951 Fenwal 3561DSI Controller For use on the following burner: EC200 EC300 Technical Literature: Midco Installation Manual and Parts List

Midco 676600 G56 Natural Pilot Orifice Kit-Tee Fitting Gas #60 Dr. (.040) -- Air #26 Dr. (.147) Used on the following burners: Unipower G Technical Literature: Midco Unipower G Series Parts List

Midco 645850 Electrode Wire Repair Kit Midco 645850 Includes: Electrode Wires Boots Strain Reliefs For use on the following burners: J83-DS Technical Literature:   Midco J83DS Parts List

Midco 645260 Valve Replacement Kit ASCO Gas Valve Replacement Kit   Midco 645260 Features: 24V 3/4" For use on the following burners: J83-DS

Midco 644700 Input Stop NippleFor use on the following burners:J121-DSJ81A-3J121A-3J40-DSJ83-DSJ80-DSJ80-3J120-3NOTE: Minimum billing of 75$ on Midco parts. If you would like to order this product in a quantity of one (1) and other Midco products, give...

Midco 641752 Main Gas Port and Tube Kit For use on the following burners: J121-DS J81A-3 J121A-3 J83-DS J40-DS J80-DS J80-3 J120-3

Midco 640605 Low Capacity Tube Weldment For use on the following burners: J81A-3 J121A-3 J83-DS J40-DS J80-DS J80-3

Midco 640490 Input Adjuster Screw For use on the following burners: J121-DS J81A-3 J121A-3 J40-DS J83-DS J80-DS J80-3 J120-3 NOTE: Minimum billing of 75$ on Midco parts. If you would like to order this product in a quantity of one (1) and other Midco...

Midco 621570 Terminal Strip Used with DS24A Burner

Midco 491600 Motor Mounting Ring less Rubber Mounts and NutsReplacement for the following burners:400B-02400B-02P400-33DS45DS45BNOTE: Minimum billing of 75$ on Midco parts. If you would like to order this product in a quantity of one (1) and other Midco...

Honeywell 392125-2 36" Ignition Cable for S86 Series 36" ignition cable assembly with a right angle boot on the igniter end and a straight boot on the module end. For use with the S86/S87 family.

Honeywell 203765 Bracket for S7800 FSG Remote Mounting Bracket for S7800 Display

Midco 2030702 J81(A)/82/83 Natural Kit This Conversion kit is used for going from LP gas to Natural gas.