Parker P4811 Replaceable Core Filter Drier Shell 1-3/8" OD Features Flexibility over a wide range of applications ODF Solder fittings Powder paint exterior coating surpasses 500 hour ASTM salt spray test Aluminum end plate with access port...

Johnson P45NCA-12C Lube Oil Control 120-Second for CopelandThe P45 control provides dependable, low lube oil pressure protection for refrigeration compressors. The low-adjustable factory-set pressure setting provides operation to the compressor...

Johnson P145NCB-12C Lube Oil Control 120-Second for Copeland 1/4" Male Flare The P128 and P145 Series controls provide dependable low pressure lube oil cut-out for pressure lubricated refrigeration compressors. The P128 Series offer adjustable range...

Grace P-R2-M3RF3 Ethernet Panel Interface Connector Mounted outside the control panel housing; the Panel Interface Connector uses programming ports to eliminate the need to open the panel door. Grace P-R2-M3RF3 Features: No Cable Bulkhead Component RJ45...

McDonnell & Miller P-3-SS Ground Pole The McDonnell stainless steel(coated in teflon) are used for use with RS sensors. 36" probe. Please see technical tab for literatureMcDonnell & Miller Technical Literature

McDonnell & Miller P-2-SS Ground Pole The McDonnell stainless steel(coated in teflon) are used for use with RS sensors. 24" probe. Please see technical tab for literature

ABB OTS40T3 Terminal Shroud Terminal Shroud, used with OT16-40F3, FT3. For line or load side. ABB OTS40T3 Features: Snap-On Mounting 3 Pole Transparent Order Code: 1SCA105317R1001 Technical Literature: ABB Switch-Disconnectors

ABB OTS40T1 Terminal Shroud Terminal Shroud, 1-Pole. It is used for line or load side. Used on #OTPS40FPN1. Technical Literature: ABB Switch-Disconnectors

ABB OTPS40FPN1 Switch Disconnect, Fourth Pole DIN Rail and Base Mounted Switch 4th Pole accessory, to be used with Manual Switch Disconnectors OT16....40F3/F6. ABB OTPS40FPN1 Specifications: Mountable on the side of the 3-pole switch frame Order Code:...

ABB OTPS40FDN1 Switch Disconnect, Fourth Pole Door Mounted 4th Pole accessory, to be used with Manual Switch Disconnectors OT16....40FT3. ABB OTPS40FDN1 Specifications: Mountable on the side of the 3-pole switch frame Order Code:...

ABB OTPS125FD Switch Disconnect Fourth Pole Door Mounted 4th Pole accessory, to be used with Manual Switch Disconnectors OT100-125FT3. ABB OTPS125FD Specifications: Mountable on the side of the 3-Pole Switch Frame Order Code: 1SCA105096R1001 Technical...

ABB OT80F3 Non-Fusible Switch Disconnector This is a front operated Switch Disconnector. Types OT 16...125 The package includes protected terminal clamps, IP 20. ABB OT80F3 Features: 3 Pole 80A Rated at 600Vac Screw Terminals Operating...

ABB OT63F3 Non-Fusible Switch Disconnector This is a front operated Switch Disconnector. Types OT 16...125 The package includes protected terminal clamps, IP 20. ABB OT63F3 Features: 3 Pole 60A Rated at 600Vac UL508

ABB OT60F3 Non-Fusible Switch Disconnector This is a front operated Switch Disconnector. Types OT 16...125 The package includes protected terminal clamps, IP 20. ABB OT60F3 Features: 3 pole 60 Amp Position of line terminals: Top in - bottom out...

ABB OT40FT3 Non-Fusible Switch Disconnector, 40A ABB OT40FT3 Features: Front operated switch-disconnector 3 Pole 40 Amp Rated at 600Vac UL508 Door Mounted Position of line terminals - Top in-bottom out 1.69in long x 2.12in wide x 2.04 in high...

ABB OT40F3 Non-Fusible Disconnect Switch Front operated Switch Disconnector. Types OT 16...125 The package includes protected terminal clamps, IP 20. ABB OT40F3 Features: 3 Pole 40 Amp Rated at 600Vac Operating mechanism - mechanism on top of the...

ABB OT30FT3 Door Mount Switch ABB OT30FT3 Features: 3 Pole 30A 600Vac Non-Fusible

ABB OT30F3 Switch Disconnector, 30A Mountable on DIN rails or base plates and on the door, either by snap-on and screw fitting. ABB OT30F3 Features: 3 Pole 30 Amp Rated at 600Vac UL98 Technical Literature: ABB Switch Disconnect Literature

ABB OT25F3 Switch Disconnector, 25A Front operated switch-disconnector. Types OT 16...125 This package also includes protected terminal clamps, IP 20. ABB OT25F3 Features 3 Pole 25 Amp Rated at 600Vac UL508 Non-Fusible Position of line terminals: top in...

ABB OT200U03 Switch Disconnector, 200A Mechanism accessible at end of switch including protected terminal clamps, IP 20. ABB OT200U03 Features: 200A Main Circuit 1000V Operational Voltage 3 Pole Base Mounting Lug Terminals Handle and Shaft Not Included...