Honeywell 209541B/B Excel 10 Terminator Terminator Module for FTT Networks Features 1 Required for Star, T-Tap, Loop, or Mixed Topologies 2 Required for Daisy Chain Topology

Schneider 20-712 Dial Stop Kit for 22XX Series Pneumatic StatInternal Stop Kit for mounting on base of 2 x 2" devices onlySchneider Technical Literature

Robertshaw 1950-532 Thermopile 36" The primary function of the thermopile is to detect the existence of a flame in gas applications. This function will allow the burner gas to properly ignite on the call for heat. The 1950 series are for use with...

Siemens 195-0003 Receiver Controller RC195 3 Input with Gauge Features Pneumatic receiver controller Pressure rating operating 22 Max pressure 30 PSI Air consumption 60 SCIM Multiple input Operating temp 40-120F 5 11/16" H x 3 1/2" D x 6 3/4" W

Robertshaw 1922-001 Junction Block This adaptor will connect the thermocouple circuit with the high limited switch on valves without the slotted magnet. Robertshaw 1922-001 Features: 6" Lead wire

Siemens 192-841 Retrostat Kit TH192 192-203D Features Pneumatic Thermostat Contact Action Reverse Single Setpoint Heating/Cooling Range 45-85F Cover Mounting Tubing Adapter

Siemens 192-633 Test Probe for Thermostats Siemens test probe for pneumatic thermostat with gauge

Siemens 192-266 Pneumatic T-Stat Cover Beige Pneumatic Thermostat Cover. Features: Plastic 3/14" height, 2 1/4" wide , 1 1/2" deep Use with 190 series pneumatic thermostats

Siemens 192-264 Pneumatic T-Stat Cover Day Night Pneumatic Thermostat Cover. Features: Plastic 3/14" height, 2 1/4" wide , 1 1/2" deep Use with 190 series pneumatic thermostats

Siemens 192-256 Pneumatic T-Stat Cover, Beige Pneumatic Thermostat Cover. Features: Plastic 3/14" height, 2 1/4" wide , 1 1/2" deep Use with 190 series pneumatic thermostats

Mars 19010 RelayMars 71 relay (potential). Includes instructions, mounting brackets, spade adapters and screws. Terminal connections are screw-type and can be converted to push-on with drop out voltage of 121V.

Mars 19007 Relay Mars 68 relay (potential). Includes instructions, mounting brackets, spade adapters and screws. Terminal connections are screw-type and can be converted to push-on with drop out voltage of 135V.

Mars 19005 RelayMars 66 relay (potential). Includes instructions, mounting brackets, spade adapters and screws. Terminal connections are screw-type and can be converted to push-on with drop out voltage of 120V.

Mars 19004 Relay Mars 65 relay (potential). Includes instructions, mounting brackets, spade adapters and screws. Terminal connections are screw-type and can be converted to push-on with drop out voltage of 90V.

Mars 19003 RelayMars 64 relay (potential). Includes instructions, mounting brackets, spade adapters and screws. Terminal connections are screw-type and can be converted to push-on with 120V.

Mars 19001 Relay KitMARS 6 PAK RELAY KIT

Hoffman 17C-2 Steam Trap Vert 1/2" The Hoffman steam trap is used to vent air and gas in response to pressure. Resistant to water hammer and chemicals, created with a brass body and has stainless steel components. Technical Literature: Hoffman...

Hoffman 17C-2 Steam Trap Swivel 1/2" The Hoffman steam trap is used to vent air and gas in response to pressure. Resistant to water hammer and chemicals, created with a brass body and has stainless steel components. Technical Literature: Hoffman...

Hoffman 17C-2 Steam Trap Angle, 1/2" The Hoffman steam trap is used to vent air and gas in response to pressure. Resistant to water hammer and chemicals, created with a brass body and has stainless steel components. The angle on this product is 1/2"...

Robertshaw 1751-016 LP Conversion Kit The Robertshaw 1751-016 is suitable for LP gas. Works except for hydraulic models which cannot be field converted. It is considered a uni-line add on pressure for a kit. It fits the series 700/710 Models. The...