Honeywell VS820C1100 Millivolt Gas Valve, 3/4 x 3/4"

These gas controls combine a Lite-Rite manual gas cock, safety shutoff Pilotstat assembly, millivoltage automatic valve operator, and optional gas pressure regulator. They require the use of a 750 mV Powerpile generator (thermopile). The generator, heated by the pilot burner flame, provides the electrical energy to operate the combination gas control. A millivoltage thermostat with suitable accessory controls completes the automatic control system for the heating appliance.

Honeywell VS820C1100 Features:

• Build includes pilot flow adjustment screw.
• Complete safety shutoff on pilot flame failure.
• LITE-RITE (OFF-PILOT-ON) lighting sequence.
• Considered to be Self-powered automatic control.
• 750 mV voltage
• 1/2 psi pressure rating
• Step: 0.9" w.c. Non-Adjustable // Full Rate: 3.5" W.C. pressure regulator setpoint
• 3/4" NPT x 3/4" NPT with 1/2" NPT side outlets
• 32 F to 175 F operating temperature range
• Compression fitting for 1/4" OD Tubing pilot gas outlet
• 1/8" NPT with plug outlet pressure tap
• Straight-through, multi-tapped with 1/2" right and left outlets plugged
• Natural Fuel
• Combination screw and 1/4" male quick connects for electrical connection
• Step opening
• Standing Pilot Ignition Type
• Includes (2) Bushings: 3/4" NPT to 1/2" NPT and 1/2" NPT to 3/8" NPT
• 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
• 4-3/4" high x 4-1/16" wide x 3-3/16" deep