Misc. Electrical Components

Dwyer LPG3-D8222N Low Pressure Gage Features: 0 - 32" w.c. (0 - 18.5 oz / in²) 2-2/3" (63 mm) Steel with black finish Polycarbonate lens 110% pressure limit Temperatuer limit: -40 to 150 degrees F (-40 to 65 degrees C)

Dwyer RMC-145-SSV Flowmeter Features: 10" Scale 1.2-10 GPM of Water Stainless Steel Valve

Dwyer 2020-BUNA-IC Magnehelic Differential Pressure Gage Features: 0 - 20" W.C. Buna-N Elastomers Impregnated Case Made to Order -- No cancellations, no returns

Dwyer 2060-BUNA-IC Magnehelic Differential Pressure Gage Features: 0 - 60" W.C. Buna-N Elastomers Impregnated Case Made to Order -- No cancellations, no returns

Schneider YBA-514-1 Mounting Nut Used with VB-7xxx 1/2-2" VB-9xxx 1/2-1-1/2" Valves

Johnson WEL14A-603R 1/2" Copper Well 5-13/13" x .43 Inside Diameter Bulb Wells are used in conjunction with Remote Bulb Temperature Controls where bulb insertion into a vessel or container to sense temperature is required. WZ Series Wells are used with...

Schneider TOOL-095-1 Calibration Tool Kit Pneumatic

Schneider TOOL-082 Pocket Calibration Wrench With 5/64" Allen

Schneider TOOL-080-1 Manual Change Over Wrench (included in TOOL-95-1)

Johnson TE-1800-9600 Wall Box Kit with Stainless Steel Finish Wallplate Cover Kit, stainless steel finish, adapts 4000 Series backets and covers to standard conduit wallbox.

Maxitrol TD214G Remote Selector

Hayward 11502 1-1/2" TBX Nut1-1/2" Tu Nut PVC

Honeywell T991B1003 Modulating Temperature Reset Controller Automatic outdoor reset controller for air or liquid. Raises heating medium control point automatically as outdoor temperature falls. Features: Used for modulating control of water or air...

Johnson T-4002-125 Plastic Back (Surface) Plastic surface mounting back for surface mounted humidistats with exposed tubing.

Johnson T-4002-123 2-Pipe Angle Fitting 5/32" Pneumatic Terminal connector, with angle fittings for surface mounted thermostats with exposed tubing.

Johnson T-4002-122 2-Pipe Straight Fitting 5/32" Pneumatic Terminal connector, with two straight fittings for plug-in connection to 5/32 in. O.D. polyethylene tubing

Supco SPP5 Hard Start Kit Supco hard start kit with capacitor for compressors . Supco SPP5 Features: Easy 2-wire installation 90 to 277 VAC 1/2 - 10 HP 43 to 53 MFD 300% Torque

Supco SPP Starter Pow-R-Pack Supco starter Pow-R-Pak without capacitors for compressors . Supco SPP Features: Easy 2-wire installation 90 to 277 VAC 1/2 - 10 Hp 250% Torque

Grasslin SD Screwdriver, Red

McDonnell & Miller SA64-2 Bellow Assembly Replacement bellows assembly only for number 64 and 764 controls. This part connects to the float on one end and to the switch on the other. Please see technical tab for literatureMcDonnell & Miller...