Maxitrol 325-3L47-33 3/8" with 1, 12A09 Leak Limiter R325C10-711 5# Regulator +OPD47 The 325 Series is a pounds to inches regulator, meeting utility specifications. The 325 Series regulator is for use on residential, commercial, and industrial...

Phoenix Contact 2834740 General Purpose Relay Module Phoenix Contact 2834740 Features: Screw Connection Relay socket Integrated LED Engage/disengage manual actuate lever Retaining bracket

Dungs 230473 Modular Pressure Regulators FRI 707/6 The Dungs FRI/6 pressure regulator combines a pressure regulator and a 50 micron gas filter in one housing. The FRI/6 pressure regulator is recommended for industrial and commercial heating...

Maxitrol TD294E-609-0818 Dual Temp Sensor Maxitrol dual temp sensor remote, Selectra Modulation

Maxitrol MT1-12 Mixing Tube 12" This Maxitrol product is a 12" mixing tube used with a 4x4 box.

Phoenix Contact 3030213 Plug-in Bridge FBS 10-5 This phoenix contact plug-in bridge with 10 position jumpers has an advantage, that it can bridge up to 50 terminal blocks in the two bridge shafts of the CLIPLINE complete system in one step. Phoenix...

Dungs 230475 Gas Pressure Regulator FRI 712/6 The Dungs FRI/6 pressure regulator combines a pressure regulator and a 50 micron gas filter in one housing. The FRI/6 pressure regulator is recommended for industrial and commercial heating application and is...

Maxitrol RV81-1010 Regulator 1-1/4" Built with R8110-38 Spring Most common applications to be used with this regulator are residential, commercial, and industrial gas-fired appliances and equipment used on low or medium pressure gas supplies. Maxitrol...

Midco 840000 Pilot Regulator, 1/8" For use on the following burners: RE4850BA RE4700BA 400-33 F400-13 F400-23 F400-33 F400B-33 J121-DS J81A-3 J121A-3 J83-DS J40-DS J80-DS J80-3 J120-3 Technical Literature:   Midco International Burner Lines ...

Maxitrol 325-5L-88 1" Regulator, 3/8" NPT with 12A39 Limter and R325E10-711A Spring Housings are corrision-resistant aluminum alloy and external venting must be in accordance with government and plumbing codes and regulations. Maxitrol 325-5L-88...

Maxitrol 210D-1010 1-1/4" Regulator with R8110-515 Spring Installed The 210 series has been designed for maximum control function in an easy to use package. The series is intended for use with gas-fired boilers, steam generators, industrial furnaces,...

Dungs 224843 Dual Modular Safety Shutoff Valve, DMV-D 702/602 Does not include flange, however the flange is available for purchase, in sizes: 1/2", 3/4", and 1". Available in NPT or RP. Please call for flange pricing. Dungs 224843 Features: 120 Vac...

Maxitrol RV12LT-11 Regulator 1/8" Built with R1210T-35 spring Most common applications to be used with this regulator are residential, commercial cooking appliances, barbecues, hearth products, and pilot lines. Maxitrol RV12LT-11 Features: 1/8" Pipe...

Dungs 210319 DIN Connector for DMV, 4 Black Pins Used with DMV modular Valves; DIN connector and M20 Conduit connector is not included - Order Separately NOTE: Minimum billing of $100 on Dungs parts. If you would like to order this product in a quantity...

Dungs 230474 Gas Pressure Regulator FRI 710/6 The Dungs FRI/6 pressure regulator combines a pressure regulator and a 50 micron gas filter in one housing. The FRI/6 pressure regulator is recommended for industrial and commercial heating application and is...

Maxitrol R400Z-33 3/8" Zero Governor Regulator Both the RZ and 210Z series are adaptable for air-gas mixing applications. They may be used for outlet pressures close to atmospheric, from slightly above to slightly below (-1.0 to 1.5 w.c.; -2.5 mbar to 3...

Maxitrol R400S-33 5# Regulator, 3/8" The R & RS series is intended for use with both main burner and pilot load applications. The double diaphragm balanced valve design makes it possible to build a regulator physically small in size yet having good...

Maxitrol R500Z-44 Zero Governor Regulator, 1/2" Both the RZ and 210Z series are adaptable for air-gas mixing applications. They may be used for outlet pressures close to atmospheric, from slightly above to slightly below (-1.0” to 1.5” w.c.; -2.5 mbar to...

Dungs 240671 Conduit Adaptor Application Used with DIN connector(210-319) (ordered separately) 65 in-lb Max Torque M 20 to 1/2" NPT PART NUMBER HAS BEEN CHANGED - OLD PART NUMBER #240-671 NOTE: Minimum billing of $75 on Dungs parts. If...

Maxitrol 13A31-50 Vent Protector, 3/8" NPT This Maxitrol 3/8" NPT vent protector is for use on vent opening to protect breather hole from rain, snow, foreign particles and insects. Vent protector must be mounted in an upright position. For outdoor use in...