Actuator Accessories

Honeywell 14003297-001 Replack Kit for VP Actuator Valve repack kit for VP526A, VP527A, or VP531A valves with 3/16 inch stem Please see technical tab for literature on 14003297-001https://customer.honeywell...

Honeywell 14003124-002 Repair Kit For MP953B,D,F Actuator MP953B,D,F Diaphragm Repair Kit

Honeywell 14002039-001 Diaphragm Sleeve For MP953D Pneumatic MP953D Diaphragm Sleeve Used With: MP953B,D,F

Belimo ZG-LF112 Crankarm Adaptor Kit for LF Actuators Belimo crankarm adaptor kit for LF with retrofit bracket is built for systems that cannot be mounted directly to the damper shaft. It is used for outside or inside the duct mounting. Belimo ZG-LF112...

Belimo ZG-112 Mounting Bracket For LF Belimo ZG-112 Mounting Bracket is built to the LF series actuator in the same mounting locations as common foot mounted, and crank arm style actuators. The ZG-112 is provided with hole patterns to mount the LF series...

Honeywell D690A1028 10" Round Damper Low-Leakage Honeywell D690A1028 Features: Neoprene seal for tight closing and low leakage Oilite bearings for long life 90 degree damper travel for a variety of applications Technical Literature:...

Belimo ZG-HTR Actuator Heater Kit for AF/NF The Thermostat/Heater Kit is built for field install on AF and NF series actuators. It was manufactured as a thermostatically controlled heater, allowing the actuators to be used below their normal low ambient...

Honeywell 50001194-001 Bracket for MS Actuators Foot Mounting Kit See technical tab for literature on part # 50001194-001 https://customer.honeywell.com/resources/Techlit/TechLitDocuments/62-0000s/62-0204.pdf

Honeywell 27520L 48" Push Rod 5/16" Push Rod (5/16" dia, 48" length)

Belimo ZG-118 Universal Mounting Bracket The Belimo ZG-118 is built for AFB/NFB Actuators is designed for applications where the actuator cannot be mounted directly to the shaft. It may be used for outside or inside the duct mounting. Belimo ZG-118...

Honeywell 311851/0062 Stem Extension 8" MP953A, C and E Stem extension for 8" dia 3/4" stroke MP953A, C, E

Honeywell 27520K 36" Push Rod 5/16"Push Rod (5/16" dia, 36" length)

Honeywell 102546 Ball Joint Assembly Ball joint assembly for damper applications for use with 5/16 inch diameter push rod. Honeywell 102546 Features: 5/16" Diameter Ball Joint Damper Linkage Type Used with Damper Linkages

Honeywell 26026B Crank Arm 1/2" x 3"Damper Arm, 1/2" shaft, 3 in long

Honeywell 27520G 24" Push Rod 5/16" Push Rod (5/16" dia, 24" length)

Honeywell 27520E 18" Push Rod 5/16" Push Rod (5/16" dia, 18" length) used with: All Actuators and Dampers

Belimo ZG-LMSA Short Shaft Adaptor This Belimo ZG-LMSA is a short shaft adaptor (shaft extension) for the LM Actuators. Belimo ZG-LMSA Features: Extend 1/2" Shaft - 2" long Technical Literature: Belimo Mechanical Accessory Literature  

Honeywell 26025B Crank Arm 3/8 x 3" Damper crank arm for 3/8 in. diameter axle. Elongated slot for linkage connection. Slot scaled for 40-50-60-75-90 degrees.