Parker PCX-48 High Capacity Gold Label Filter Core For use in either liquid or suction line applications, the PCX-48 offers added moisture capacity and good acid capacity when compared to the PCK-48. Technical Literature: Parker Filter-Driers

Parker PCK-48HH Charcoal Burnout Gold Label Replaceable Core Shell Formulated with charcoal to remove wax on low temperature systems even before problems occur. It can be used in either liquid or suction line applications and also removes acids, water,...

Parker P969 Replaceable Core Filter Drier Shell 1-1/8" OD Features Flexibility over a wide range of applications ODF Solder fittings Powder paint exterior coating surpasses 500 hour ASTM salt spray test Aluminum end plate with access port...

Parker P967 Replaceable Core Filter Drier Shell 7/8" OD Features Flexibility over a wide range of applications ODF Solder fittings Powder paint exterior coating surpasses 500 hour ASTM salt spray test Aluminum end plate with access port Rated...

Parker P9621 Replaceable Core Filter Drier Shell 2-5/8" OD Features Flexibility over a wide range of applications ODF Solder fittings Powder paint exterior coating surpasses 500 hour ASTM salt spray test Aluminum end plate with access port...

Parker P9613 Replaceable Core Filter Drier Shell 1-5/8" OD Features Flexibility over a wide range of applications ODF Solder fittings Powder paint exterior coating surpasses 500 hour ASTM salt spray test Aluminum end plate with access port...

Parker P487 Replaceable Core Filter Drier Shell 7/8" OD Features Flexibility over a wide range of applications ODF Solder fittings Powder paint exterior coating surpasses 500 hour ASTM salt spray test Aluminum end plate with access port Rated...

Parker P485 Replaceable Core Filter Drier Shell 5/8" OD Features Flexibility over a wide range of applications ODF Solder fittings Powder paint exterior coating surpasses 500 hour ASTM salt spray test Aluminum end plate with access port Rated...

Parker P4811 Replaceable Core Filter Drier Shell 1-3/8" OD Features Flexibility over a wide range of applications ODF Solder fittings Powder paint exterior coating surpasses 500 hour ASTM salt spray test Aluminum end plate with access port...

Johnson P45NCA-12C Lube Oil Control 120-Second for CopelandThe P45 control provides dependable, low lube oil pressure protection for refrigeration compressors. The low-adjustable factory-set pressure setting provides operation to the compressor...

Johnson P145NCB-12C Lube Oil Control 120-Second for Copeland 1/4" Male Flare The P128 and P145 Series controls provide dependable low pressure lube oil cut-out for pressure lubricated refrigeration compressors. The P128 Series offer adjustable range...

Grace P-R2-M3RF3 Ethernet Panel Interface Connector Mounted outside the control panel housing; the Panel Interface Connector uses programming ports to eliminate the need to open the panel door. Grace P-R2-M3RF3 Features: No Cable Bulkhead Component RJ45...

McDonnell & Miller P-3-SS Ground Pole The McDonnell stainless steel(coated in teflon) are used for use with RS sensors. 36" probe. Please see technical tab for literatureMcDonnell & Miller Technical Literature

McDonnell & Miller P-2-SS Ground Pole The McDonnell stainless steel(coated in teflon) are used for use with RS sensors. 24" probe. Please see technical tab for literature

ABB OTS40T3 Terminal Shroud Terminal Shroud, used with OT16-40F3, FT3. For line or load side. ABB OTS40T3 Features: Snap-On Mounting 3 Pole Transparent Order Code: 1SCA105317R1001

ABB OTS40T1 Terminal Shroud Terminal Shroud, 1-Pole. It is used for line or load side. Used on #OTPS40FPN1. ABB Technical Literature

ABB OTPS40FPN1 Switch Disconnect, Fourth Pole DIN Rail and Base Mounted Switch 4th Pole accessory, to be used with Manual Switch Disconnectors OT16....40F3/F6. ABB OTPS40FPN1 Specifications: Mountable on the side of the 3-pole switch frame Order...

ABB OTPS40FDN1 Switch Disconnect, Fourth Pole Door Mounted 4th Pole accessory, to be used with Manual Switch Disconnectors OT16....40FT3. ABB OTPS40FDN1 Specifications: Mountable on the side of the 3-pole switch frame Order Code: 1SCA104999R1001 ABB...

ABB OTPS125FD Switch Disconnect Fourth Pole Door Mounted 4th Pole accessory, to be used with Manual Switch Disconnectors OT100-125FT3. ABB OTPS125FD Specifications: Mountable on the side of the 3-Pole Switch Frame Order Code: 1SCA105096R1001 ABB...

ABB OT80F3 Non-Fusible Switch Disconnector This is a front operated Switch Disconnector. Types OT 16...125 The package includes protected terminal clamps, IP 20. ABB OT80F3 Features: 3 Pole 80A Rated at 600Vac Screw Terminals Operating...