Honeywell M7284C1000 Mod IV Motor 90 Deg 120V

The Series 71, 72 and 76 Modutrol IV Motors are spring return and non-spring return motors used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed

Honeywell M7284C1000 Features:

• Non-spring return, foot mounted actuator with 150 lb-in. torque.
• Integral spring return returns motor to normal position in the event of a power failure on spring return models.
• Motor and circuitry operate from 24 Vac
• Quick-connect terminals are standard--screw terminal adapter is available
• Motors have field adjustable stroke (90 to 160 degrees)
• Dual shafts (slotted and tapped on both ends)
• Auxiliary switch cam
• Fixed torque throughout the entire voltage range

Technical Literature: