Motors

Honeywell M7284C1000 Mod IV Motor 90 Deg 120V The Series 71, 72 and 76 Modutrol IV Motors are spring return and non-spring return motors used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to...

Honeywell M6184D1035 Mod IV Motor 24V Floating Non-spring return floating control motors used with controllers that provide a switched SPDT or floating output to operate valves. Honeywell M6184D1035 Features: Used with electrical...

Honeywell M9184D1021 Mod IV Motor 24V With Aux Tapped Shaft Non-spring return modulating proportional control motor used with controllers that provide a Series 90 output to operate dampers or valves. Honeywell M9184D1021 Features Motor and circuitry...

Honeywell M9174C1025 Mod IV Motor 120V Non-spring return modulating proportional control motor used with controllers that provide a Series 90 output to operate dampers or valves. Honeywell M9174C1025 Features: 120Vac supply voltage 2 Internal auxiliary...

Honeywell S7820A1007 Remote Reset Module This Honeywell remote reset module serves as link between remote reset pushbutton and relay module. Allows 7800 SERIES relay module to be reset from a remote location. Reset button can be installed up to 1000 feet...

Honeywell 4074EDC Resistor Kit Control Signal: 4-20ma Converter Power Consumption Driving (VA):20 VA Weight (lb):.03 Temperature Range, Ambient (C): -18 C to +55 C Includes:Resistors 66.5 ohm and 237 ohm Used With:One M91XX motor from a 4-20 mA controller

Honeywell 7616BR Mod Motor Crank arm Features Crank Arm assembly with clip for Damper Arm of V4055, V4062 or V9055

Honeywell M7284A1004 Mod IV Motor, 120V Integral spring return returns motor to normal position in the event of a power failure on spring return models. Honeywell M7284A1004 Features: Foot-mounted Non-spring return fail safe mode Adjustable; 90 to 160...

Honeywell M9164A1005 Modutrol Motor Honeywell M9164A1005 modutrol motor, 120V Non-Spring Return Foot Mounted Actuator with 35 lb-in. torque. Mod motors often control burner valves to modulate the amount of heat being produced by the equipment burner or...