Replacement Oven Door Handles

Polar 7014-001 Square Corner Hinge Designed for square corner applications. Has a steel laminated strap for added strength. Swings 270 degrees to enable door to be opened completely. Bracket - Powder coated ductile iron 3" wide x 5-1/4" high. Strap -...

Polar 7011-LN Padlocking HandleLN-Keylocking Handle. Steel, 5/8" steel shank, narrow mounting plate, push button locking cylinder; available keyed alike or miscellaneous. Finish - Casting is zinc plated and powder coated.

Polar 7011-L Key Locking Handle, Heavy Duty L-Keylocking Handle. Steel handle with 5/8" steel shank has push button locking cylinder. Available keyed-alike or keyed miscellaneous. Finish - Casting is zinc plated and powder coated. Mounting plate is zinc...

Polar 7011-IH Inside HandleSteel Inside Handle. #8 ga. x 1" wide x 12 1/2". Finish - Zinc plated.

Polar 7011-C Dead Bolt Center CaseSteel Centercase only. For use where a single point dead bolt lock is desired. Steel case with steel bolt. Bolt is tapered for positive cam latching. Universal for right and left hand doors. If outside handle is required...

Polar 7011-006-S Dead Bolt LockHeavy Duty 3 Point Dead Bolt Lock with Inside Safety Release. Zinc Plated dead bolt lock with round rods and rod guides but with Safety Centercase with Inside Handle.

Polar 7011-006 Dead Bolt LockHeavy Duty 3 Point Dead Bolt Lock. Zinc plated dead bolt lock with round rods and rod guides

Polar 7011 Dead Bolt LockHeavy Duty 3 Point Dead Bolt Lock. For rear and side doors. Inside handle available if desired. Material - Steel with steel bolts, the 7011 features a tapered center bolt for a positive cam latch at center position. Reversible,...

Polar 701-201 Trim Ring Trim Ring. Black plastic trim ring for surface mounting of the 701 rope ring. 4.2" diameter, .3" thick.

Polar 701 Recessed RopeRecessed Rope Ring for use with 1/4" plywood. Manufactured from 16 ga. steel. Solid one piece construction dish design assures strong retention of 1/4" dia. D-Ring. 3-1/2" dia., 2 mounting holes for 1/4" screws. Finish - Zinc plated

Polar 700 D-RingEconomy Rope Ring. Surface mount rope ring and mounting strap. Bracket - 10 Ga. Steel. "D" Ring - 0.225 Dia. Steel. Finish - Zinc Plated

Polar 658-SSP Heavy Duty Anti-Rack LockAnti-Rack Lock Kit. This lock can be supplied as a complete bolt-on keeper using 1" schedule 40 pipe. Supplied with two large brackets with nylon bearing, one center bracket with nylon bearings, two keepers, two...

Polar 658-002 Heavy Duty Anti-Rack LockAnti-Rack Lock Kit. This lock can be supplied as a complete bolt-on keeper using 1" schedule 40 pipe. Supplied with two large brackets with nylon bearing, one center bracket with nylon bearings, two keepers, two...

Polar 658-001 Heavy Duty Anti-Rack LockAnti-Rack Lock Kit. This lock can be supplied as a complete weldment using 1" schedule 40 pipe or it can be supplied as a kit of parts for welding in the field. Supplied with two large brackets with nylon bearing,...

Polar 636-SS Handle, 36", Stainless The Polar 636-SS Pull Handle is a heavy duty assist handle for applications on large or heavy swinging doors, including equipment such as industrial ovens, truck trailers, walk-in coolers, etc. Formed 16 ga, 304...

Polar 624-A Tubular Handle 24", AluminumSeries 600 Aluminum Heavy Duty Assist Handles. Heavy duty assist handles made from 5/8" dia. rod. For applications requiring a heavy duty handle. Stainless Steel has a polished finish. 24" Grab Area, 1" O.D...

Polar 624 Handle, 24", Chrome plated The Polar 624 Pull Handle is a heavy duty assist handle for applications on large or heavy swinging doors, including equipment such as industrial ovens, truck trailers, walk-in coolers, etc. Formed 5/8" diameter...

Polar 618-SS Tubular Handle 18", StainlessSeries 600 Aluminum Heavy Duty Assist Handles. Heavy duty assist handles made from 5/8" dia. rod. For applications requiring a heavy duty handle. Stainless Steel has a polished finish. 18" Grab Area, 1" O.D...

Polar 618-A Handle, 18", AluminumSeries 600 Aluminum Heavy Duty Assist Handles. Heavy duty assist handles made from 5/8" dia. rod. For applications requiring a heavy duty handle. Stainless Steel has a polished finish. 18" Grab Area, 1" O.D. Tubular...

Polar 618 Handle, 18", Chrome plated The Polar 618 Pull Handle is a heavy duty assist handle for applications on large or heavy swinging doors, including equipment such as industrial ovens, truck trailers, walk-in coolers, etc. Formed 5/8" diameter...