Regulators

Maxitrol 210J-3232 4" Flanged Regulator with R11110-36 Spring Installed The 210 series has been designed for maximum control function in an easy to use package. The series is intended for use with gas-fired boilers, steam generators, industrial...

Maxitrol 13A25 Vent Protector, 1/2" NPT This Maxitrol 1/2" NPT outdoor vent protector is a vent limiting device used for the 325-7 Series gas regulators. Technical Literature:Maxitrol Accessories

Maxitrol 12A49 Automatic Vent Limiting Device This Maxitrol product is a 1/2" NPT vent limiting device used for the 325-7A, 325-7AL, 325-9, and 325-9L regulators applications. CSA certified for 2 psi (LP) and 5 psi (natural) inlet pressure Technical...

Maxitrol 12A39 Brass Vent Limiter This Maxitrol product is a 3/8" NPT vent limiting device used for the 325-5A and 325-56AL applications. Technical Literature:Maxitrol Accessories

Maxitrol 12A34 Automatic Vent Limiter, Brass This Maxitrol product is a 3/8" NPT Automatic Vent Limiting Device, CSA certified with RV81 Technical Literature:Maxitrol Accessories

Maxitrol 12A09 Leak Limiter Green This Maxitrol product is a vent limiting orifice or device when used with Maxitrol regulators, which does not release or relieve gas into the environment during normal operation 1.0 CFH. Vent limiters are designed for...

Maxitrol 12A04 Vent Leak Limiter, Aluminum This Maxitrol product is a vent limiting orifice or device when used with Maxitrol regulators, which does not release or relieve gas into the environment during normal operation. Vent limiters are designed for...

Sensus 143-80-2HP Service Regulator Valve Body: Cast Iron, 125 psig Working Pressure Spring and Lower Case: Die-Cast Aluminum Orifice: 3/16" Brass Valve Seat/Stem: One piece molded Buna-N seat pad and fiberglass reinforced nylon stem ...

Rittal 1045250 Enclosure 20x16x8, Carbon Steel20x16x8, Carbon Steel 7035

Dungs 070383 Stand Alone Pressure Regulator FRS 505 The Dungs FRS pressure regulator is a spring-loaded pressure regulator with adjustable set point spring. Internal sensor for regulating output pressure. Has an input pressures up to 7 PSI and has a...

Maxitrol RV53-66 Regulator 3/4" Built with 12A04 and R5310-38 Spring Most common applications to be used with this regulator are residential, commercial, and industrial gas-fired appliances and equipment used on low or medium pressure gas supplies...

Maxitrol RV47L-44 Regulator, 1/2" Built with R4710-35 Spring These regulators are designed for main burner and pilot load applications where precise control of tiny flows is an essential operating requirement. Maxitrol RV47L-44 Features: 1/2" Pipe...

Maxitrol RV111-2020 Regulator, 2-12" Built with with R11110-38 spring Most common applications to be used with this regulator are residential, commercial, and industrial gas-fired appliances and equipment used on low or medium pressure gas supplies...

Maxitrol R9110-36 Plated Spring 3-6" Used with RV91 and 210E Regulators Technical Literature:https://www.maxitrol.com/kits-and-springs/

Maxitrol R600Z-88 Zero Governor Regulator, 1" Both the RZ and 210Z series are adaptable for air-gas mixing applications. They may be used for outlet pressures close to atmospheric, from slightly above to slightly below (-1.0” to 1.5” w.c.; -2.5 mbar to 3...

Maxitrol R5210-13 Brown Spring 1-3.5" Used with RV52, R500, and R500S Regulators Technical Literature:Maxitrol Springs

Maxitrol PLUG1 Gas Convenience Outlet Integrated excess flow valve and thermally activated shut-off device. Maxitrol PLUG1 Features: Hose Plug rotates 360 degrees Suitable for use with gas - natural or propane Approved for Indoor and Outdoor use...

Maxitrol 325-7A-1212 1-1/2" Lever Acting Gas Regulator The 325-7 is designed especially for the growing segment of electronic ignition equipment, permits the utilization of greater capacities without sacrificing performance. The 325 Series regulator is...

Maxitrol 325-5AL-44 1/2" 2# Regulator with 12A39 and R325E10-711A Spring FEATURES: • Designed for multi-poise mounting... • Self-aligning valve with lever action for dead end lockup... • Durable, corrosion-resistant construction... • High performance...

Maxitrol 325-5-66 3/4" 10# Regulator with 12A39 and R325E10-412A Spring The 325 Series is a pounds to inches regulator, meeting utility specifications. The 325 Series regulator is for use on residential, commercial, and industrial applications where...