Regulators

Maxitrol 210D-1010 1-1/4" Regulator with R8110-515 Spring Installed The 210 series has been designed for maximum control function in an easy to use package. The series is intended for use with gas-fired boilers, steam generators, industrial furnaces,...

Dungs 224843 Dual Modular Safety Shutoff Valve, DMV-D 702/602 Does not include flange, however the flange is available for purchase, in sizes: 1/2", 3/4", and 1". Available in NPT or RP. Please call for flange pricing. Dungs 224843 Features: 120...

Maxitrol RV12LT-11 Regulator 1/8" Built with R1210T-35 spring Most common applications to be used with this regulator are residential, commercial cooking appliances, barbecues, hearth products, and pilot lines. Maxitrol RV12LT-11 Features: 1/8" Pipe...

Dungs 210319 DIN Connector for DMV, 4 Black Pins Used with DMV modular Valves; DIN connector and M20 Conduit connector is not included - Order Separately NOTE: Minimum billing of $100 on Dungs parts. If you would like to order this product in a quantity...

Dungs 230474 Gas Pressure Regulator FRI 710/6 The Dungs FRI/6 pressure regulator combines a pressure regulator and a 50 micron gas filter in one housing. The FRI/6 pressure regulator is recommended for industrial and commercial heating application and is...

Maxitrol R400Z-33 3/8" Zero Governor Regulator Both the RZ and 210Z series are adaptable for air-gas mixing applications. They may be used for outlet pressures close to atmospheric, from slightly above to slightly below (-1.0 to 1.5 w.c.; -2.5 mbar to 3...

Maxitrol R400S-33 5# Regulator, 3/8" The R & RS series is intended for use with both main burner and pilot load applications. The double diaphragm balanced valve design makes it possible to build a regulator physically small in size yet having good...

Maxitrol R500Z-44 Zero Governor Regulator, 1/2" Both the RZ and 210Z series are adaptable for air-gas mixing applications. They may be used for outlet pressures close to atmospheric, from slightly above to slightly below (-1.0” to 1.5” w.c.; -2.5 mbar to...

Dungs 240671 Conduit Adaptor Application Used with DIN connector(210-319) (ordered separately) 65 in-lb Max Torque M 20 to 1/2" NPT PART NUMBER HAS BEEN CHANGED - OLD PART NUMBER #240-671 NOTE: Minimum billing of $75 on Dungs parts. If...

Maxitrol 13A31-50 Vent Protector, 3/8" NPT This Maxitrol 3/8" NPT vent protector is for use on vent opening to protect breather hole from rain, snow, foreign particles and insects. Vent protector must be mounted in an upright position. For outdoor use in...

Maxitrol 325-7L-1212 1-1/2" Lever Acting Gas Regulator 2# OBSOLETE The 325-7 is designed especially for the growing segment of electronic ignition equipment, permits the utilization of greater capacities without sacrificing performance. The 325 Series...

Maxitrol 325-7L-1010 1-1/4" Lever Acting Gas Regulator 2# OBSOLETE The 325-7 is designed especially for the growing segment of electronic ignition equipment, permits the utilization of greater capacities without sacrificing performance. The 325 Series...

Maxitrol 325-5AL-66 3/4" 2# Regulator with 12A39 and R325E10-711A Spring FEATURES: • Designed for multi-poise mounting... • Self-aligning valve with lever action for dead end lockup... • Durable, corrosion-resistant construction... • High performance...

Phoenix Contact 3031267 Ground Modular Terminal BlockFeatures:ST 2.5-TWIN-PEType of connection: Spring-cage connectionCross section: 0.08 mm - 4 mmWidth: 5.2 mmColor: green-yellowMounting type: NS 35/7,5, NS 35/15

Phoenix Contact 3031241 Feed-Through Modular Terminal Block Features: ST 2.5-TWIN Type of connection: Spring-cage connection Cross section: 0.08 mm- 4 mm Width: 5.2 mm Color: gray Mounting type: NS 35/7,5, NS 35/15